APOKRISIS SUPPRESSOR BUFFY MUFFY from APOKRISIS near Horn Lake, Mississippi, USA

   BUFFY MUFFY V1

MANUFACTURER:** APOKRISIS

WWW.APOKRISIS662.COM

FFL/SOT:** 1-64-033-07-9C-07143

LOCATION:** HORN LAKE, MISSISSIPPI

I. Device Classification

Type of Firearm: Silencer / Suppressor

Model Designation: BUFFY MUFFY (Short-Configuration Rimfire Rifle Variant)

Length: 4.5 – 5.0 Inches (High-Volume Compact Footprint)

Outer Diameter:~1.50 Inches ("Short & Fat" High-Volume Profile)

Caliber Compatibility:** Multi-Caliber Rimfire (.22 LR, .22 WMR, .17 HMR)

II. Physical Architecture & Construction Materials

Construction Typology: High-Volume Compact Stacked Baffle Architecture with Outer Retention Shell

Structural & Material Specifications

The BUFFY MUFFY V1.2 utilizes an oversized diameter-to-length aspect ratio specifically engineered for rifle platforms. By expanding the internal radial volume rather than

extending overall barrel length, the design delivers maximum initial volume expansion while maintaining a minimal operational footprint:

1. High-Volume Containment Housing & Thread Interface:

Constructed with a heavy-wall outer sleeve featuring an enlarged 1.50-inch internal expansion envelope. Direct-thread retention is achieved via heavy-duty, coarse-pitch internal threads designed with radiused roots and flat crests to ensure rigid shoulder alignment, eliminate cross-threading, and withstand cyclical muzzle blast without thread stretch or radial deflection.

2. Internal Stacked Baffle Column:

Features a series of indexed, interlocking conical/clipped baffles optimized for rifle-length pressure profiles. The modular segments seat tightly together within the tube, directing axial blast impulse loads down the length of the stack to eliminate shear stresses across the housing.

3. Material Matrix & Micro-Crystalline Heat Treatment:

The entire unit is manufactured from carbon-fiber reinforced polyamide composite (PA6-CF / PAHT-CF) using solid, concentric perimeter loops to provide continuous hoop strength under peak chamber pressures. All printed components undergo a complete secondary convection crystallization anneal (80°C – 100°C soak profile) to relieve internal build stress and maximize Z-axis interlayer shear resistance.

4. Ablative Throat Coating:

The primary blast chamber and forward baffle apertures are treated with a heat-cured micro-ceramic barrier layer, providing an impact-resistant shield that repels supersonic unburned powder particulates and prevents abrasive gas-cutting along the bore axis.

III. Method of Operation & Signature Reduction Mechanics

The device achieves acoustic suppression and flash elimination strictly through oversized primary volume expansion, progressive gas shearing, and slowed velocity dispersion:

1.Primary Expansion & Pressure Trough:

Upon rifle discharge, supersonic propellant gases exit the muzzle into the oversized primary blast chamber. The substantial 1.5-inch diameter creates an immediate volumetric drop in gas pressure and temperature, drastically reducing bore-line jetting before the gas reaches the secondary stack.

2. Linear Shear & Gas Stagnation: The high-velocity gas front is forced through progressive baffle stages featuring asymmetrical clipping. This geometry continually strips, turns, and trips the advancing gas into secondary annular dead zones, inducing high turbulence and forcing the gas to bleed its kinetic energy inside the can rather than exiting behind the projectile.

3. Signature & Acoustic Deceleration

By delaying gas exit velocity through extreme volumetric turbulence, the primary acoustic pressure wave is flattened well below hearing-safe levels, eliminating muzzle blast concussive signatures and snuffing secondary flash without creating excessive backpressure on bolt-action or semi-automatic hosts.

IV. Manufacturer Certification & Mandatory Markings

This device is manufactured under the authority of APOKRISIS (FFL Type 07 / SOT Class 02) in Horn Lake, MS. The outer housing features legal registration data digitally embedded into the 3D geometry file or deep-engraved to a compliant relief depth exceeding .003 inches in strict adherence to 27 CFR § 479.102, formatted as follows:

APOKRISIS

HORN LAKE, MS, USA

MODEL: BUFFY MUFFY

CAL: .22 CAL

SN: [ASSIGNED SERIAL NUMBER

DESIGNED TO BE SEMI DISPOSABLE, REPLACEMENT BAFFLES AND CAP CAN BE PURCHASED FROM OUR WEBSITE WWW.APOKRISIS662.COM TO RENEW THE BUFFY MUFFY SUPPRESSOR WITH NO ADDITIONAL REGISTRATION REQUIRED. 

GUARENTEED FOR 300 ROUNDS, ENGINEERED AND TESTED FOR 1000'S OF ROUNDS. FRACTION OF THE COST TO LAST LONGER THAN YOU WILL EVER USE IT.