6.5 WSM project I started a few years ago but haven't really followed through.


30" Hart barrel 1.060-18 TPI with a 1.210 OD tapered to 0.850 at the muzzle. I was previously mounted on a Kelbly Kodiak action and fired as a single shot for one prone match.  I believe the twist is either 1/7.5 or 1/8.  There have been 138 rounds fired for load development and one prone match.


1 PTG 6.5 WSM reamer plus go/nogo gauges.  The reamer was used one time for the above barrel.  The reamer might be useful for shortening or reworking the barrel for a different receiver.


138 once fired Winchester brass


200 pcs new Winchester 270 WSM brass neck sized to 6.5mm


1 Neil Jones 6.5 WSM seating die for use in an arbor press.