****USED****

With enhanced durability and improved function, the new and improved PSA PA10 Gen3 is here. The Gen3 model offers a black nitride stainless gas tube to better resist high heat and corrosion while maintaining a glossy black finish. All Gen3 PA10 models come with a dimpled barrel for ease of gas block replacement if you choose to do so.

The Palmetto State Armory PA10 Gen3 features a forged receiver set that has been designed with a relief cut geometry to allow the use of a wider variety of aftermarket bolt carrier groups. A carbine length buffer tube with a short, heavy buffer coupled with a standard PA10 buffer spring. All Gen3 PA10 rifles from Palmetto State Armory come equipped with a Toolcraft BCG, which ensures thousands and thousands of rounds will feed through the rifle and an EPT or two-stage nickel boron fire control group with a 4.5lb pull makes for an easy but controllable course of fire.

Barrel: The dimpled, 416R Stainless Steel, 308 WIN 1/10 twist, mid-length gas system upper is paired with a Palmetto State Armory Classic Mid-Length Handguard, Front Sight Base, and an A2-style muzzle device. The gas system is enhanced with a nitrided gas tube in order to better resist high heat and corrosion.

Upper: Precision machined from forged 7075-T6 aluminum, then Black anodize hard coated to MIL-8625 Type 3 class 2. With enhanced dual retention anti-slip and anti-rotating handguards.

Bolt Carrier Group: Tool craft 9310 steel bolt assembly with extra strength extractor springs that is nitride for increased durability. 8620 carrier, nitride treated, with a nitride treated gas key properly staked with grade 8 fasteners. A 7075 T6 aluminum charging handle is also included.

Lower: Precision machined from forged 7075-T6 aluminum, these lowers are then Black anodize hardcoated to MIL-8625 Type 3 class 2. With an enhanced polished trigger (EPT), a PSA Classic M4 Stock, and a PSA Classic A2 Grip. This is an ideal platform for the .308 cartridge.

Gen 3:

Lower Includes relief cuts for a broader compatibility with 308 BCG's
Twice Staked Castle Nuts
Standardized carbine length buffer tube with short, heavy buffer
Dimpled 416R Stainless Steel Barrel
Extra Power Extractor Springs
7075 T6 Charging Handle Included in all uppers
Black Nitride Gas Tube
Barrel Nuts properly torqued to military specifications


Barrel Length: 18”
Barrel Material: 416R Stainless Steel
Barrel Profile: A2 Style
Chamber: .308 WIN
Twist Rate: 1 in 10”
Extension: M4
Gas System: Mid-Length
Gas Block Type: Front Sight Base
Upper Receiver: Forged 7075 T6 Aluminum
Receiver Style: PA10 Flat top with Feed Ramps
Receiver Finish: Hardcoat Anodized
Forward Assist: Yes
Dust Cover: Yes
Handguard Type: PSA Classic Polymer Midlength Handguard
Bolt Carrier Group: Yes, Toolcraft PA10 BCG with extra power extractor spring
Staked Gas Key: Yes
Lower Receiver: Forged 7075 T6 Aluminum
Receiver Finish: Hardcoat Anodized
Fire Control Group: Enhanced Polished Trigger (EPT)
Buffer Tube: 7075 T6 Aluminum
Adjustment: 6-position telescoping stock
Stock: PSA Classic M4 Stock, Black
Grip: PSA Classic A2 Grip, Black
Magazine: 20 Round PMAG

BUY NOW:  https://www.hdfirearm.com/rifles/semi-automatic-rifles/palmetto-state-armory-pa-10-3717749