RSS Feed - All Categories, Arizona

(Arizona) KAK Industry K-SPEC Enhanced BCG 5.56/300 NP3/Gold - $ 247

Fri, 27 Mar 2026 03:40:27 GMT

You can find the KAK Industry K-SPEC Enhanced BCG 5.56/300 NP3/Gold here Fast FREE shipping on this item!

The KAK Industry K-SPEC Enhanced Bolt Carrier Group is packed with features focused on increasing the reliability of your AR-15, regardless of whether it is suppressed or unsuppressed. The K-SPEC requires no additional tuning or tweaking of the gas or recoil systems to run reliably. The K-SPEC features an M16 full auto profile, slotted angled carrier rails, downward gas vents, and dual ejectors on the bolt. The K-SPEC Enhanced Bolt Carrier Group is 100% made in the USA.

The Slotted Angled Carrier Rails are strategically located with angle cuts in the rails designed to disperse debris into noncritical areas, resulting in ultra-high functionality in the toughest conditions, including suppressor fouling and foreign contaminants.

The Downward Gas Vents reduce the amount of debris and gas vented towards the shooter's face. The two standard gas relief ports have been relocated from the ejection port side of the K-SPEC carrier and placed underneath, in the magazine feed lip channels. Two additional emergency relief ports have also been added to the bottom of the carrier to mitigate structural damage in the event of a case head separation. Testing has shown that venting the gases through the magazine well has no negative impact on the feeding or function of the magazine or ammunition, and any added heat is negligible.

The Dual Ejector system features two Mil-Spec ejectors and springs that require no proprietary parts. Ejector holes are centered on the lugs to avoid any reduction in the strength of the bolt. The dual ejector system increases the ejection reliability and adds consistency to the ejection pattern.

Features:

Caliber: 5.56/300 Blackout
Designed to function reliably in the toughest conditions
Optimized for both Suppressed and Un-suppressed use
Dual Ejectors for enhanced reliability
Angled Carrier Rail Cuts for flawless function in adverse conditions and prolonged suppressed use
Downward Gas Ports to reduce gas blowback to shooter
Full Auto Profile
Permatex added between Gas Key and Carrier Mating Surface
Carrier: 7075 Aircraft Grade Aluminum, outside rails, bolt runs, and gas bores ground to .0002 tolerances, Satin Gold Anodize Finish
Bolt: 9310 steel, outside diameters ground to .0002 tolerances, MPI test, NP3 finish
Firing Pin: 8740 steel, Swiss turned, heat treated, precision ground, chrome plated
Cam Pin: 4140 steel, Swiss turned, heat treated, NP3 finish
Extractor: 4140 steel, fully machined, Phosphate finish
Extractor pin: S7 tool steel, ground, heat treated
Ejector: S7 tool steel, ground, heat treated
Gas key: 4130 steel, heat treated, secured with T25 torx fasteners, torqued to spec, staked with hydraulic staking machine, Chrome finish

(Arizona) KAK Industry K-SPEC Enhanced BCG 5.56/300 Chrome Lined Phosphate - $ 180

Fri, 27 Mar 2026 03:40:10 GMT

You can find the KAK Industry K-SPEC Enhanced BCG 5.56/300 Chrome Lined Phosphate here Fast FREE shipping on this item!

The KAK Industry K-SPEC Enhanced Bolt Carrier Group is packed with features focused on increasing the reliability of your AR-15, regardless of whether it is suppressed or unsuppressed. The K-SPEC requires no additional tuning or tweaking of the gas or recoil systems to run reliably. The K-SPEC features an M16 full auto profile, slotted angled carrier rails, downward gas vents, and dual ejectors on the bolt. The K-SPEC Enhanced Bolt Carrier Group is 100% made in the USA.

The Slotted Angled Carrier Rails are strategically located with angle cuts in the rails designed to disperse debris into noncritical areas, resulting in ultra-high functionality in the toughest conditions, including suppressor fouling and foreign contaminants.

The Downward Gas Vents reduce the amount of debris and gas vented towards the shooter's face. The two standard gas relief ports have been relocated from the ejection port side of the K-SPEC carrier and placed underneath, in the magazine feed lip channels. Two additional emergency relief ports have also been added to the bottom of the carrier to mitigate structural damage in the event of a case head separation. Testing has shown that venting the gases through the magazine well has no negative impact on the feeding or function of the magazine or ammunition, and any added heat is negligible.

The Dual Ejector system features two Mil-Spec ejectors and springs that require no proprietary parts. Ejector holes are centered on the lugs to avoid any reduction in the strength of the bolt. The dual ejector system increases the ejection reliability and adds consistency to the ejection pattern.

Features:

Caliber: 5.56/300 Blackout
Designed to function reliably in the toughest conditions
Optimized for both Suppressed and Un-suppressed use
Dual Ejectors for enhanced reliability
Angled Carrier Rail Cuts for flawless function in adverse conditions and prolonged suppressed use
Downward Gas Ports to reduce gas blowback to shooter
Full Auto Profile
Permatex added between Gas Key and Carrier Mating Surface
Carrier: 8620 steel, outside rails, bolt runs, and gas bores ground to .0002 tolerances, chrome lined phosphate finish
Bolt: 9310 steel, outside diameters ground to .0002 tolerances, MPI test, phosphate finish
Firing Pin: 8740 steel, Swiss turned, heat treated, precision ground, chrome plated
Cam Pin: 4140 steel, Swiss turned, heat treated, Phosphate finish
Extractor: 4140 steel, fully machined, Phosphate finish
Extractor pin: S7 tool steel, ground, heat treated
Ejector: S7 tool steel, ground, heat treated
Gas key: 4130 steel, heat treated, secured with T25 torx fasteners, torqued to spec, staked with hydraulic staking machine, Chrome lined phosphate

(Arizona) Luth-AR Gas Tube Rifle Length - $ 14

Fri, 27 Mar 2026 03:39:40 GMT

You can find the Luth-AR Gas Tube Rifle Length here Fast $9.95 shipping! Orders over $200 ship for free!

The Luth-AR Gas Tube is made of Stainless Steel. Includes roll pin.

Length: Rifle (15 3/16")

(Arizona) Ballistic Advantage Modern 16" 5.56 1:7 HBAR Mid Gas System Barrel - $ 104

Fri, 27 Mar 2026 03:39:26 GMT

You can find the Ballistic Advantage Modern 16" 5.56 1:7 HBAR Mid Gas System Barrel here Fast $9.95 shipping! Orders over $200 ship for free!

Ballistic Advantage Modern Series 16" 1:7 twist Barrel with a Mid Length gas system, HBAR barrel profile and chambered for 5.56 NATO.

Ballistic Advantage Modern Series barrels are machined from 4150 Chrome Moly Vanadium Steel and finished with a corrosion resistant QPQ Salt Bath Nitride treatment. The M4 feed ramp extension also has a QPQ finish.

Caliber	5.56 NATO
Barrel Length	16"
Twist Rate	1:7
Gas System	Mid Length
Barrel Profile	HBAR
Inside Finish	Salt Bath Nitride
Outside Finish	Salt Bath Nitride
Material	4150 Chrome Moly Vanadium
Muzzle Thread	1/2x28 TPI (Threads Per Inch)
Diameter At Gas Port	.750"

(Arizona) Bootleg CamLok Handguard M-LOK 15" - $ 160

Fri, 27 Mar 2026 03:38:39 GMT

You can find the Bootleg CamLok Handguard M-LOK 15" here Fast FREE shipping on this item!

The Bootleg CamLok Handguard for AR-15 has a lightweight skeletonized design with a full length Mil-Spec Picatinny rail on top, and M-LOK slots on the other three sides. Extruded from 6061 aluminum for lightweight and durability and finished with Mil-Spec hard anodizing coating. This handguard features the simple CamLok system which allows the handguard to be installed quickly and securely.

Length: 15"
Weight: 14.45oz
Internal Diameter 1.385"

(Arizona) Hogue Mossberg 500 Tamer Shotgun Pistol Grip - $ 34

Fri, 27 Mar 2026 03:38:24 GMT

You can find the Hogue Mossberg 500 Tamer Shotgun Pistol Grip here. Fast $9.95 shipping on this item!

The Mossberg 500 Tamer Shotgun Pistol Grip is a rubber overmold with an orthopedic hand shape with finger grooves.

Firearm: Mossberg 500 12/16/20 & .410 Gauge
Color: Black

(Arizona) Magpul Hunter Lite 700 Stock Remington 700 Short Action OD Green - $ 209

Fri, 27 Mar 2026 03:38:05 GMT

You can find the Magpul Hunter Lite 700 Stock Remington 700 Short Action OD Green here Fast FREE shipping on this item!

The Magpul Hunter Lite makes your Remington 700 easier to carry, shoulders quicker, and shoots tighter. Nearly 25% lighter and slimmer than the original Magpul Hunter Stock, it helps you move further and stay in the field longer. The rigid aluminum V-bedding block and reinforced steel pillars provide a custom fit and the precision you need. Ambidextrous by design and built for hard use, the individually adjustable and seriously customizable Hunter Lite doesn't just cut the weight; it is smarter, tougher, and ready for whatever Mother Nature throws your way.
Made in the USA.

Features:>br>

Trimmed-down lines in a 2.4-pound chassis keeps you light and fast in the field
V-block bedding system with steel pillars and integrated magwell secures your action and AICS-pattern magazines for consistency and reliable feeding
Comb height and length of pull adjustability for custom fit and handling
Ambidextrous magazine release and inlet insert for left- or right-handed shooters
Integrates five forend M-LOK slots for accessories and includes front and rear sling swivel studs
Rugged polymer shell, snag-resistant surfaces, and Magpul's proven durability ensure performance in rain, snow, mud, or dust

Rifle: Remington 700 Short Action and Remington 700-pattern receivers with barrel contours up to Medium Palma (0.920" dia. 5.50" forward of the breech). Due to the integral magazine well, this model is not compatible with Remington hinged floor plates.
Color: OD Green
Butt-Pad Dimensions: 1.5 x 4.9 in.
Length of Pull: 13-15 in. LOP using included 1/2 in. spacers
Weight: 2.4 lbs (including spacers and riser)
Width of Stock, max: 1.75 in.

(Arizona) KAK Industry K-SPEC Enhanced BCG C158 5.56/300 Chrome Lined Phosphate - $ 189

Fri, 27 Mar 2026 03:37:06 GMT

You can find the KAK Industry K-SPEC Enhanced BCG C158 5.56/300 Chrome Lined Phosphate here Fast FREE shipping on this item!

The KAK Industry K-SPEC Enhanced Bolt Carrier Group is packed with features focused on increasing the reliability of your AR-15, regardless of whether it is suppressed or unsuppressed. The K-SPEC requires no additional tuning or tweaking of the gas or recoil systems to run reliably. The K-SPEC features an M16 full auto profile, slotted angled carrier rails, downward gas vents, and dual ejectors on the bolt. The K-SPEC Enhanced Bolt Carrier Group is 100% made in the USA.

The Slotted Angled Carrier Rails are strategically located with angle cuts in the rails designed to disperse debris into noncritical areas, resulting in ultra-high functionality in the toughest conditions, including suppressor fouling and foreign contaminants.

The Downward Gas Vents reduce the amount of debris and gas vented towards the shooter's face. The two standard gas relief ports have been relocated from the ejection port side of the K-SPEC carrier and placed underneath, in the magazine feed lip channels. Two additional emergency relief ports have also been added to the bottom of the carrier to mitigate structural damage in the event of a case head separation. Testing has shown that venting the gases through the magazine well has no negative impact on the feeding or function of the magazine or ammunition, and any added heat is negligible.

The Dual Ejector system features two Mil-Spec ejectors and springs that require no proprietary parts. Ejector holes are centered on the lugs to avoid any reduction in the strength of the bolt. The dual ejector system increases the ejection reliability and adds consistency to the ejection pattern.

Features:

Caliber: 5.56/300 Blackout
Designed to function reliably in the toughest conditions
Optimized for both Suppressed and Un-suppressed use
Dual Ejectors for enhanced reliability
Angled Carrier Rail Cuts for flawless function in adverse conditions and prolonged suppressed use
Downward Gas Ports to reduce gas blowback to shooter
Full Auto Profile
Permatex added between Gas Key and Carrier Mating Surface
Carrier: 8620 steel, outside rails, bolt runs, and gas bores ground to .0002 tolerances, chrome lined phosphate finish
Bolt: C158 steel, outside diameters ground to .0002 tolerances, MPI test, phosphate finish
Firing Pin: 8740 steel, Swiss turned, heat treated, precision ground, chrome plated
Cam Pin: 4140 steel, Swiss turned, heat treated, Phosphate finish
Extractor: 4140 steel, fully machined, Phosphate finish
Extractor pin: S7 tool steel, ground, heat treated
Ejector: S7 tool steel, ground, heat treated
Gas key: 4130 steel, heat treated, secured with T25 torx fasteners, torqued to spec, staked with hydraulic staking machine, Chrome lined phosphate

(Tucson) Advantage Arms 22LR Conversion Kit for Glock 19/23 Gen1-3 MOD - $ 348

Fri, 27 Mar 2026 03:36:30 GMT

You can find the Advantage Arms 22LR Conversion Kit for Glock 19/23 Gen1-3 MOD here. Fast FREE shipping on this item!

The Advantage Arms 22LR Conversion Kit converts your 9mm/.40 S&W Glock to 22lr. Includes two 15 round magazines, a 4.02" Threaded Barrel, a range bag, and a recessed cut optics ready slide for a variety of red dot options. Slide includes iron sights. Red Dot and Handgun Not Included.

Firearm: Glock 19/23 Gen1-Gen3

(Arizona) KAK Industry Bolt Carrier Group 5.56/300 C158 Chrome Lined Phosphate - $ 126

Fri, 27 Mar 2026 03:35:08 GMT

You can find the KAK Industry Bolt Carrier Group 5.56/300 C158 Chrome Lined Phosphate here Fast FREE shipping on this item!

The KAK Industry AR15 Bolt Carrier Group features a M16 full-auto profile carrier with a Phosphate coating that provides excellent protection against wear and corrosion, and a C158 bolt. The chrome lining offers additional durability and resistance to the stresses of repeated firing. 100% made in the USA.

Features:

Caliber: 5.56/300 Blackout
M16 Auto Profile Carrier Machined from Aircraft/ Bearing Quality 8620 Steel, Properly Heat Treated, Ground to Perfection, chrome lined phosphate finish
Bolt is machined from a single piece of Carpenter 158 steel, heat treated properly, precision ground, Shot Peened, and MPI tested, with a phosphate finish
Firing pin is machined to the mil-spec print from 8740, precision ground, and chrome plated
One Piece Billet Fully Machined Enhanced Extractor, Phosphate coated for Increased reliability and corrosion resistance
Phosphate Cam Pin
S7 tool steel ejector and extractor retaining pin
4130 Gas Key, chrome lined phosphate, precision staked using our hydraulic staking machine, chrome lined phosphate finish
KAK Carrier Key Screws- T25 drive, Grade 8, Properly Heat Treated

(Arizona) Surefire SOCOM Closed-Tine Flash Hider 5.56 1/2x28 - $ 152

Fri, 27 Mar 2026 03:34:15 GMT

You can find the Surefire SOCOM Closed-Tine Flash Hider 5.56 1/2x28 here Fast FREE shipping on this item!

The Surefire SOCOM Closed-Tine Flash Hider serves as rock-solid, precision mounting platforms for SureFire SOCOM Fast-Attach Suppressors, as well as a standalone muzzle device. The Closed-Tine Flash Hider is easy to install and highly resistant to gas and particle erosion. Each SureFire flash hider is individually inspected for concentricity and alignment and are covered by SureFire's No-Hassle Guarantee.

Caliber: 5.56
Threads: 1/2x28

(Arizona) Luth-AR H1 Tungsten Carbine Buffer .223/5.56 - $ 35

Fri, 27 Mar 2026 03:33:30 GMT

You can find the Luth-AR H1 Tungsten Carbine Buffer .223/5.56 here Fast $9.95 shipping! Orders over $200 ship for free!

The Luth-AR H1 Carbine Buffer for .223/5.56 contains 1 tungsten slug and 2 steel slugs for a total weight of 4.0 oz. The heavier weight buffer will help provide reliable function with short gas system weapons as well as a reduction in felt recoil.

(Tucson) Bootleg 5.56 Nitride Bolt Carrier Group - $ 115

Fri, 27 Mar 2026 03:33:15 GMT

You can find the Bootleg 5.56 Nitride Bolt Carrier Group here.

The Bootleg 5.56 Nitride Bolt Carrier Group is a complete BCG machined from 4140 steel and finished with a black nitride coating. The Nitride coating enhances the surface hardness, ensuring smooth operation and minimizing the need for frequent lubrication. Further, this results in a cleaner and more reliable shooting experience. Uses all Mil-Spec components and built to meet Mil-Spec requirements including a staked gas key. Full Auto bolt carrier group.

Features:

Machined from 4140 Steel
Nitride Coated
Uses all Standard Mil Spec components and Staked Mil Spec Gas Key
5.56 Complete Bolt Assembly
Complete with Cam Pin, Firing Pin and Firing Pin retaining Pin

(Tucson) Midwest SP Series Free Float M-LOK 10" Handguard Black - $ 156

Fri, 27 Mar 2026 03:32:38 GMT

You can find the Midwest SP Series Free Float M-LOK 10" Handguard Black here.

The Midwest Industries SP Series Free Float M-LOK Handguards are designed to be suppressor compatible. The one piece free float design is made of extremely durable 6061 aluminum and hard coat anodized. The top picatinny rail has T markings for accessory locations. The seven other side have M-LOK accessory slots along the length of the handguard. Includes barrel nut, mounting hardware, one five slot M-LOK polymer rail section and barrel nut wrench. Made in the USA.

Inside Diameter: 1.75"
Outside Diameter: 2.0"
Length: 10.5"
Weight: 11.2
Color: Black

(Arizona) Ergo Grip Flat Top Tactical Deluxe Zero Angle 4020BK Black - $ 39

Fri, 27 Mar 2026 03:30:12 GMT

You can find the Ergo Grip Flat Top Tactical Deluxe Zero Angle 4020BK Black here Fast $9.95 shipping! Orders over $200 ship for free!

The Ergo Grip Flat Top Tactical Deluxe Zero Angle was designed for improved comfort and control on precision rifle chassis systems and the AR-15/AR-10 platforms. The new grip puts your hand in a better angle for modern shooting positions. Featuring overmolded SureGrip rubberized texturing and finger grooves.

Color: Black

(Arizona) Luth-AR Standard Carbine Buffer .223/5.56 - $ 14

Fri, 27 Mar 2026 03:29:40 GMT

You can find the Luth-AR Standard Carbine Buffer .223/5.56 here Fast $9.95 shipping! Orders over $200 ship for free!

The Luth-AR Standard Carbine Buffer for .223/5.56 contains 3 steel slugs for a total weight of 3.2 oz. The Standard weight buffer will provide reliable function with rifle length gas systems.

(Arizona) Radian AFTERBURNER + RAMJET for Sig P365XL Black - $ 390

Fri, 27 Mar 2026 03:28:15 GMT

You can find the Radian AFTERBURNER + RAMJET for Sig P365XL Black here. Fast FREE shipping on this item!

The Radian AFTERBURNER + RAMJET combo for Sig Sauer provides you with great recoil reduction and match grade accuracy while still being easy to conceal. The ported barrel features a thread-less design making it easy to install and remove the Micro-Compensator.

The AFTERBURNER compensator is machined from hardened stainless steel and the RAMJET barrel from hardened 416R stainless steel. Both the barrel and compensator have a Radianite coating for low friction, high hardness and high corrosion resistance. This results in increased durability making erosion from muzzle blast a non-issue.

The innovative INTRA-LOK mounting system uses the taper lock principle where a tapered locking screw interfaces with an angled V-groove on the underside of the barrel. This perfectly times the compensator as it locks down onto the upper barrel profile on the barrels muzzle. This makes installation of the AFTERBURNER compensator as easy as sliding the AFTERBURNER over the barrel, insert the locking screw and tighten. This also allows for easy removal for cleaning the gun.

When installed on a Sig Sauer P365XL or P365-XMACRO, the AFTERBURNER + RAMJET combo increases the overall length of the slide to a P365-FUSE allowing compatibility with all P365-FUSE holsters.

Firearm: Sig Sauer P365XL and P365-XMACRO with the 3.7" slide. *NOT compatible and will not function with SIG SAUER P365-XMACRO COMP slides (OEM integrally compensated slide)*
Barrel Finish: Black
Compensator Finish: Black

(Arizona) Bravo Company BCM MK2 Buffer Mod 1 - T1 - $ 38

Fri, 27 Mar 2026 03:27:43 GMT

You can find the Bravo Company BCM MK2 Buffer Mod 1 - T1 here Fast $9.95 shipping! Orders over $200 ship for free!

The Bravo Company BCM MK2 Buffer Mod 1 helps lessen felt recoil, without compromising reliability and provides a more consistent carrier velocity which can aid in accuracy and reliability over conventional carbine buffer systems. The increased internal counterweight travel reduces bolt bounce and the internal spring reduces the noise of the counter weight shifting and ensures a more consistent weight placement. Made of 7075T6 aluminum, hard coat anodized for lasting endurance. Comprised of Mil-Spec components.

Buffer: Mod1 - T1 Intermediate Length
Weight: 4.7oz

*IMPORTANT NOTE*
MK2 MOD 1 buffer series is to ONLY be used on the AR15 receiver platform and it ONLY works in conjunction with the BCM MK2 Receiver Extension (BCM part #BCM-MK2-RE) and the Mil-Spec Rifle M16 Action Spring (BCM part # SPRING-RIFLE-M16-ACTION). To use any other component, not specifically developed to function with the MK2 MOD1 Intermediate Buffer can cause damage to the weapon and possibly injure the operator.

(Arizona) Midwest Slim Line Free Float Handguard M-LOK 15" Black - $ 156

Fri, 27 Mar 2026 03:26:10 GMT

You can find the Midwest Slim Line Free Float Handguard M-LOK 15" Black here Fast $9.95 shipping! Orders over $200 ship for free!

The Midwest Industries Slim Line Handguard features a slim and lightweight one piece free float design that is made of extremely durable 6061 aluminum that is hard coat anodized. The top of the handguard has a full length picatinny rail. The seven other side have M-LOK accessory slots along the length of the handguard. Both sides of the handguard have built in QD sockets for QD sling connectors. Includes one five slot M-LOK polymer rail section, installation hardware and barrel nut wrench.

Made in the USA.

Inside Diameter: 1.3"
Outside Diameter: 1.5"
Length: 15"
Weight: 11.6oz installed
Color: Black

Note: Due to the many different dimensions in BILLET UPPER RECEIVERS on the market, please contact your billet upper receiver manufacture to insure fit of this handguard. This handguard is compatible with forged upper receivers as well as the Midwest Industries billet upper receiver. NOT FOR USE ON GAS PISTON AR's!

(Arizona) KAK Industry Compensator 5.56 1/2x28 - $ 13

Fri, 27 Mar 2026 03:25:29 GMT

You can find the KAK Industry Compensator 5.56 1/2x28 here Fast $9.95 shipping! Orders over $200 ship for free!

The KAK Industry Compensator is made from heat-treated steel for strength and durability and has a Phosphate finish for corrosion resistance. Does NOT include crush washer. Made in the USA.

Caliber: 5.56
Threads: 1/2x28
Overall Length: 1.750"
Weight: 2.08oz

(Arizona) Bravo Company Gunfighter One Inch Ring Light Mount M-LOK - $ 36

Fri, 27 Mar 2026 03:24:25 GMT

You can find the Bravo Company Gunfighter One Inch Ring Light Mount M-LOK here Fast $9.95 shipping! Orders over $200 ship for free!

The Bravo Company Gunfighter One Inch Ring Light Mount is designed to mount the majority of popular 1-inch round body tactical flash lights. Designed to mount at the 1:30 or 10:30(upper 45 degree) rail positions on M-LOK compatible handguards. Built from durable Aluminum and designed to be low-profile and snag-free.

(Arizona) Promag AR-15 5.56mm 65 Round Polymer Drum Magazine Black - $ 77

Fri, 27 Mar 2026 03:23:47 GMT

You can find the Promag AR-15 5.56mm 65 Round Polymer Drum Magazine Black here Fast $9.95 shipping! Orders over $200 ship for free!

ProMag's AR-15 5.56mm 65 Round Polymer Drum is constructed of a proprietary lightweight DuPont Zytel based polymer with over molded stamped steel feed lips and magazine catch. The magazine spring is made from heat treated chrome silicon wire. Made in USA.

Capacity: 65 rounds
Caliber: .223/5.56
Color: Black

(Arizona) Luth-AR Rifle Buffer Spring AR-15 .223/5.56 - $ 3

Fri, 27 Mar 2026 03:22:59 GMT

You can find the Luth-AR Rifle Buffer Spring AR-15 .223/5.56 here Fast $9.95 shipping! Orders over $200 ship for free!

Luth-AR standard A2 Buffer Spring for AR-15 based rifles. The tempered steel spring has proper tension for reliable cycling of AR-15 style rifles chambered in .223/5.56mm.

(Arizona) Dead Air Armament Keymount Muzzle Brake 7.62 5/8x24 - $ 71

Fri, 27 Mar 2026 03:21:43 GMT

You can find the Dead Air Armament Keymount Muzzle Brake 7.62 5/8x24 here. Fast $9.95 shipping! Orders over $200 ship for free!

The Dead Air Armament Keymount Muzzle Brake features the KeyMount quick attach system for your Sandman-L, Sandman-S, Sandman-K, or KeyMo equipped Nomad-30 suppressor. When shooting unsuppressed you can still employ the finest brake on the market and experience a flatter shooting rifle with minimal concussion compared to traditional muzzle brakes.

Caliber: .308/7.62
Length: 2.6"
Threads: 5/8x24

(Arizona) Luth-AR Charging Handle .223/5.56 - $ 21

Fri, 27 Mar 2026 03:20:58 GMT

You can find the Luth-AR Charging Handle .223/5.56 here Fast $9.95 shipping! Orders over $200 ship for free!

Luth-AR standard Mil-Spec charging handle.

Caliber: .223/5.56