RSS Feed - Gun Parts, Minnesota

(Minneapolis / St. Paul) Winchester M-100 magazine .308 .243 cal - $ 58

Tue, 20 Oct 2026 08:06:24 GMT

Great condition. No rust and little wear from use. Holds 4 rounds of .308.
Shipping $4.95
Paypal add 3.5%

(Minneapolis / St. Paul) Original Canadian C7 Stripper Clips, 5.56x45mm NATO - $ 14

Tue, 20 Oct 2026 08:06:21 GMT

FIVE Original Canadian Military C7 Stripper clips.

These are made from Thermold which is a temperature stable plastic. Each clip holds 10-rounds of 5.56mm NATO ammunition and can be used with the Canadian Thermold Magazine loader to quickly load the issue magazines.

Excellent design that has been copied for a commercial loader system that has similar clips branded "Thermold". While they are identical in appearance and function, we are offering the real deal with genuine military stripper clips. (Ammo not included)

$14.00 FTF
$16.00 Shipped

(Minnesota) 9mm JP Tactical Compensator - $ 65

Tue, 20 Oct 2026 08:06:21 GMT

1/2-36 TPI (9mm)
   .850 OD
   .406 Exit
   Matte Black

Features:

Redirects muzzle gases to cancel out a large portion of recoil impulse
Provides dramatically improved sight recovery for faster follow-up shots
Minimized muzzle rise
Dramatically reduced accuracy degradation between shoots
Durable QPQ finish for low wear and long lifespan
Includes pre-drilled shroud feature for easier pin-and-weld installation

(Minneapolis / St. Paul) Magpul MOE Handguards, new - $ 25

Tue, 20 Oct 2026 08:06:02 GMT

Have a limited number of New in package Magpul MOE Handguards. These are the black carbine length handguards.

Priced each.

$25.00 FTF
$29.95 Shipped

(Minneapolis / St. Paul) Geissele Automatics SSA-X Government Trigger - In Stock - $ 339

Tue, 20 Oct 2026 08:05:44 GMT

Geissele Automatics SSA-X Government Trigger
$339.99

The SSA-X Government trigger is a two-stage trigger that features a Nanocoated wide body trigger and Nanocoated Hammer, with a special Chrome Nitride disconnect that combines advancements in coating design to bring about the next evolution of the venerable SSA. These coatings dramatically enhance wear and corrosion resistance and keep the trigger running smooth and breaking clean even after heavy use with minimal lubrication. The SSA-X Government trigger is a non-adjustable trigger with a familiar M4 bow, that allows the trigger to be light enough for accurate and precise shots, but forgiving enough for dynamic close in work as well.

While the SSA-X Government Trigger comes assembled with a heavier Mil Spec pull weight, we are also including a lighter trigger spring to bring the 1^st stage down to 2.75 - 3 lbs., and the overall pull weight down to 4.25 - 5.0 lbs. if so desired.

(Minneapolis / St. Paul) CMC Gen 3 Glock Triggers - $ 60

Mon, 19 Oct 2026 22:46:12 GMT

I have two complete trigger units. 3.5 pound CMC triggers, not a lot of rounds through either. 60 dollars each.

(Minneapolis / St. Paul) 9mm AR Upper with magazines and accessories - $ 300

Mon, 19 Oct 2026 22:44:42 GMT

Clearing out some things my dad left me:

I have a complete 9mm upper with last round Bolt ahold Open, comes with a 9" barrel, MWI MOE handguard, AFG, and the proper buffer and spring....

For a little extra I can throw in an SBA3 Brace 2ETS mags, 2 24 round Glock mags, and 3 33 round Glock mags and an olight with a charger

Pricing this to move. 300 without the extras 375 with, or best offer.

(Minneapolis / St. Paul) Sig Sauer P365 Shalotek build kit - $ 1,200

Mon, 19 Oct 2026 19:05:57 GMT

Sig Sauer P365 Shalotek build kit for sale. 4.1-inch Slide and barrel and 17 round full-size grip with magwell. Holosun EPS carry red dot, (1) 17rd. Mag and (1) 21rd. Mag. Needs P365 FCU and slide completion kit as well as a mag release

(Minneapolis / St. Paul) Sig Sauer P320 FLUX build kit - $ 1,100

Mon, 19 Oct 2026 19:02:50 GMT

Sig Sauer P320 Flux build kit for sale. Full-size slide with Faxon threaded barrel, Norsso compensator, and Tactical development F1 charging handle. FLUX chassis with a Swamp Fox Kraken red dot and (2) 30 rd mags. Needs Sig P320 FCU to complete firearm

(Minneapolis / St. Paul) P365 380 Kit Sig Sauer Optic Ready Will Ship - $ 250

Mon, 19 Oct 2026 04:53:30 GMT

Used Sig Sauer P365 380 Caliber Exchange Kit - No FCU

Complete 380 Caliber Slide

Optic Ready Slide

Manual Safety Ready Grip Module

One 10rd 380 Magazine

6122031329text phone

(St. Cloud) Jard trigger for Howa - $ 100

Sun, 18 Oct 2026 12:00:08 GMT

I have a JARD trigger for a Howa 1500.
the trigger was factory set at 14oz. Pulled it as I turned the rifle into a hunting rifle now.
$100

(Minneapolis / St. Paul) MISCELLANEOUS GUN PARTS: PRICES IN DESCRIPTION! - $ 1

Sun, 18 Oct 2026 02:04:15 GMT

I have a hodgepodge of oddball parts and magazines for sale. Text me with any questions or if you want better pics. Not opposed to trades.

Text me at 269 470 3113

Smith and Wesson RESPONSE M&P mag magwell: $10

Smith and Wesson RESPONSE AR type pistol grip: $15

B5 type 22 grips: $10 each

Shield Arms Glock 43x/48 mag catch: $10

Ruger 10/22 complete trigger group: $20

Milspec charging handles: $5 each.

AR type pistol grips:

Magpul MOE K2+: $15

Hogue: $15

Others: $5 each.

Magpul Fixed AK stock: $45

Caldwell AR15 mag charger: $35

ETS pistol mag loader: $15

Smith & Wesson M&P9 / M&P FPC 9mm 23-Round Magazines: $35 each

Smith and Wesson 12 rd mag: $20

Mil-Spec Trigger Kit, AR15: 4 available from various rifles: $20 each.

Hogue Handgun Monogrip Wraparound with Finger Grooves 1911 Style Pistols: $20

Glock 19 threaded barrel, unknown manufacturer: $45

EGW gunworks Leupold DeltaPoint Pro Mount for CZ P10C / P10F / P10S (this will replace the rear sight): $40

(Minneapolis / St. Paul) 10.5" 300 BLK AR15 Upper Receiver - Black | A2 | 9" M-LOK | - $ 170

Sat, 17 Oct 2026 19:27:15 GMT

I have a brand new 300 Blackout 10.5" upper for sale. I bought it to make into a pistol for deer hunting but with the new changes it's no longer needed.

It was assembled into an AR15 with a red dot, but has not been fired.

Call or Text 651-402-2050.

Here is the info from the website.

This 10.5 inch M-LOK upper receiver comes with a 9 inch free float handguard and is built with only the best Mil-Spec components. The heart of this upper is comprised of a precision 4150 Chrome Moly Vanadium barrel.

Barrel	Specifications
Caliber	300BLK
Length	10.5"
Material	4150 Chrome Moly Vanadium
Profile	Medium
Finish	QPQ Corrosion Resistant
Gas System Length	Pistol
Gas Block Journal	.750"
Dimpled?	No
Twist Rate	1:7
Muzzle Thread	5/8x24 TPI
Weight	20.8oz
Barrel Extension	M4 Feed Ramps
Target Crown	11 Degree

Upper Receiver:

Machined from a Mil-Spec 7075 T6 forging Hard Coat Anodized per Mil-A-8625F, Type III
M4 Feed ramps
Made in the U.S.A.

Handguard:

9" free float handguard
MIL-STD 1913 Picatinny rail on top
3 M-Lok slots on 3 sides
Precision Machined 6000 Series aluminum, for high strength and weight savings
Hard Coat Anodized per Mil-A-8625F, Type III, Class 2
Clamp on system for easy assembly
Steel Barrel nut to resist movement under heat
10 oz with barrel nut and hardware
1.35" Inside Diameter
1.63" Wide
Made in USA

(Minneapolis / St. Paul) 15" billet handguard AR-15 - $ 50

Sat, 17 Oct 2026 17:44:38 GMT

Got a billet handguard for sale. 15" billet no name. Has barrel nut and locating pins also. Complete unit. Shows wear and may need cleaning. I'm located north Metro can meet

Can ship with PayPal

(Minneapolis / St. Paul) BXN Stripper Clips 7.62x39 - $ 3

Sat, 17 Oct 2026 16:16:27 GMT

BXN stripper clips. These are the best stripper clips you can get for SKS rifles. Made in the Czech Republic. Not sure how many I have, but I have a lot of them lol. $3 a piece

Phone

6 five 1 four 2 one 0 zero 2 three

(Minneapolis / St. Paul) Smith and Wesson 22a-1 slide assembly - $ 100

Sat, 17 Oct 2026 15:25:36 GMT

I've got a nice condition slide assembly to sell. Comes complete with an extra firing pin, spring and the unobtainable rod. Will not separate one lot. Cerakoted at local gun Smith. I'm located in the North Metro can meet.

Can ship with PayPal

(Minneapolis / St. Paul) Smith and Wesson 22a-1 target grip - $ 50

Sat, 17 Oct 2026 15:20:10 GMT

I've got a real nice factory wood target grip I'd like to sell. I have 3 of the 4 screws I'll through in with it. Located in the North Metro can meet.

Can ship with PayPal

(Minneapolis / St. Paul) Smith and Wesson 22a-1 threaded 5" barrel - $ 80

Sat, 17 Oct 2026 15:11:56 GMT

I got a customized 5" barrel I'd like to sell. Factory 5.5" I had a machine shop thread the barrel for a suppressor and local gun smith cerakoted the rest. Has a linear comp, 1/2-28 threads and rail for optics. Rear locating clip was broken long ago but never hindered performance or function. Shows wear and could use a good cleaning. I'm located in the north Metro can meet

(Minneapolis / St. Paul) Smith and Wesson 22a-1 bull barrel 7" - $ 100

Sat, 17 Oct 2026 15:05:59 GMT

I got a used factory 7" bull barrel I'd like to sell. Has optics rail and iron sights. Worked great for small game hunting. Has wear may need a good cleaning. I'm located north Metro can meet

(Minneapolis / St. Paul) Smith and Wesson 22a-1 magazines - $ 140

Sat, 17 Oct 2026 14:57:10 GMT

Recently broke my 22a-1 so I'm parting it out. I've 7 ten round factory magazines all in great shape. 3 are pretty new. No packaging 1 whole lot. Located in the north Metro can meet

(Minneapolis / St. Paul) 2- Red Dots, Rem 700 Archangel tactical stock, Shield 9mm extras - $ 200

Sat, 17 Oct 2026 02:34:50 GMT

ArchAngel tactical ajustable stock,fits long acton Remington 700 -308 W, 7.62's, 243. 270. 30-06, 6.5mm 7mm, 8mm etc. Very sturdy piece to build a very nice shooter. These were close to 300 a few years ago when these came out. They have come down in price now. I would take 200 cash or bullets I get to metro weekly , I am sure we can work out something. Great add to your LONG ACTION rifle. Measure the srcews holding yr barrel in. I messed around sending picks and measurements and turned out he had short action rifle. This stock is BRAND NEW still in package . I can help you set this in yr rifle b4 you go home. We can even bore site yr optic again. Please make sure you know you have a long action b4 we waste a lot of time , calls, texts,emails. Thanks

Smith & Wesson 9mm Shield , trigger gaurd laser 100 installed , bore sited included, 2- 12 rd mags,1 drum mag all new 100 for all 3 mags. I would sell pistol with all the extras extras for 600 cash.

2 Vortex red dots , larger one will work on yr AR 15, smaller on yr pistol trade for ammo? cash ? 100 each

(Minneapolis / St. Paul) MFT Minimalist Extreme Duty Stock - In Stock - $ 64

Fri, 16 Oct 2026 08:06:01 GMT

MFT Minimalist Extreme Duty Stock
$64.99

MFT Battlelink™ Extreme Duty Minimalist Stock is built based on our popular Minimalist Stock platform. Recognizing the need for a more robust stock capable of withstanding long term abuse delivered by larger caliber firearms such as tactical shotguns of 12 gauge or 7.62X51 AR-10 while remaining nimble enough for use on a 5.56.
• Slide-on replacement for collapsible butt stock
• Angled non-slip rubberized removable buttpad allows faster presentation
• Multiple Sling Slots with single point mount points
• Quick Detach Sling mounting point is positioned in the rear
• Upper section provides enhanced cheek weld
• Single MLOK connection point
• Modular Buffer Tube Plunger System, reinforced with a metal chassis

Mil Spec size 1.148 diameter receiver extensions (buffer tube)

Weight: 8.5oz

Height: 4.85"

Width: 1.59"

Length: 7.71"

(Minneapolis / St. Paul) MFT Minimalist Stock - In Stock - $ 59

Fri, 16 Oct 2026 08:06:01 GMT

MFT Minimalist Stock
$59.99

All of the functional requirements are met while keeping the weight under 6 ounces. This stock adapts and changes to your environment or operational needs by utilizing custom accessory mounts and accepts a new optimized sling configuration. The lightest stock of its kind in the market.

● Slide-on replacement for collapsible butt stock

● Angled non-slip rubberized buttpad allows faster presentation, even with body armor

● Multiple Sling Slots with single point mounting

● Quick Detach Sling mounting point is positioned for optimum usage including ambidextrous shooters

● Upper section provides enhanced cheek weld

● MilSpec Buffer Tube Spec

Mil Spec size 1.148 diameter receiver extensions (buffer tube)

Weight: 5.8oz

Height: 5.22"

Width: 1.752"

Length: 7.084"

(Minneapolis / St. Paul) 6.5 Grendle upper ammo parts - $ 300

Fri, 16 Oct 2026 00:11:26 GMT

18in Odin works barrel, gas block, gas tube, and rail. 4 stoner ar mags and assorted ammo. Fired about 20 rds through barrel.

(Rochester, MN) Deadair Wolfman 9mm - $ 750

Thu, 15 Oct 2026 14:38:03 GMT

Deadair Wolfman 9mm

Lightly used can

Comes with:

All original parts and box

Rearden hub mount

90+ wipes

Will meet at FFL for transfer