RSS Feed - Firearm Accessories, Florida

(Florida) Glock 17 Iron Sight Cut Black DLC Slide - $ 170

Sun, 07 Dec 2025 08:08:58 GMT

Hard black DLC (diamond like carbon) finish
Iron sight cuts
Front and rear serrations for ease of operation
Compatible with Gen 1-3 Glock Frames / Polymer80 PF940V2

Note: It is strongly advised to lubricate the rails before installing as this will allow the slide to break in properly.

Direct Link: https://3crtactical.com/product/glock-17-iron-sight-cut-black-dlc-slide/

(Florida) Rosco Manufacturing Bloodline Glock 19 Barrel - $ 159

Sun, 07 Dec 2025 08:08:57 GMT

The Rosco Manufacturing’s line of Glock barrels are a drop-in, match grade option that enhances the accuracy and performance of any stock Glock pistol. All Bloodline Glock barrels are made from 416R stainless steel, broached, honed, polished, and then melonited.

All barrels have also been designed with strategic beveled edges surrounding the chamber area to reduce premature wear/ tear commonly found on basic aftermarket barrels. The result is a duty capable upgrade that will not sacrifice quality. Drop a Bloodline in your Glock to experience true PERFECTION at a price that will leave you room for plenty of ammo.

This Glock Bloodline barrel is designed to work with Glock 19 pistols, generations 1 through 4. Although this is a simple to accomplish user friendly swap, we still encourage you to consult a local gunsmith should you have any questions about installation. This barrel is rated for use with SAAMI approved, factory new ammunition. Any catastrophic damage/failure caused to product by improper installation, use of reloads, or non-SAAMI approved ammunition will not be covered by the factory warranty.

Barrel Length: 4″ OAL
Material: 416R stainless steel
Caliber: 9 x 19mm
Twist: 1:10 RH
Crown: Recessed. 50/50 surface split
Finish: Melonite (electro bore polished)
Rifling: Pulled broach
Fit: Glock 19 Gen 1-4

Direct Link: https://3crtactical.com/product/rosco-manufacturing-bloodline-glock-19-barrel/

(Orlando) cmmg 22lr conversion kit - $ 200

Sun, 07 Dec 2025 08:08:57 GMT

brand new

(Florida) AMMO 9mm 124gr Luger 100- Count5% OFF CODE ARMSLIST5 - $ 28

Sun, 07 Dec 2025 08:08:57 GMT

9mm 124 gr Luger Ammo - 100 count 2A Ammo, LLC

Armslist customers use code: ARMSLIST5 and receive 5% off your order

Caliber: 9mm Luger
124 gr Copper plated bullet
Mixed once fired brass cases completely RE-manufactured
Non-corrosive Boxer primer
Clean burning low flash powder
Great for target practice
Box contains 100 count

(Florida) AMMO 45ACP 230gr 100 Count 5% OFF CODE ARMSLIST5 - $ 46

Sun, 07 Dec 2025 08:08:57 GMT

45acp 230gr - 100 count 2A Ammo, LLC

Armslist customers use code: ARMSLIST5 and receive 5% off your order

Caliber: 45 ACP
230 gr Copper plated bullet
NEW Brass cases
Non-corrosive Boxer primer
Clean burning low flash powder
Great for target practice
Box contains 100 count

(South West Florida) TAGUA BSH - $ 33

Sun, 07 Dec 2025 08:08:56 GMT

TAGUA BSH
https://www.gunshoppeonline.com/tagua-bsh.html

Tagua, BSH Belt Slide, Fits Colt Govt 5", Right Hand, Black

(South West Florida) TAGUA IPH IN/PANT 1911 5" - $ 35

Sun, 07 Dec 2025 08:08:56 GMT

TAGUA IPH IN/PANT 1911 5"

https://www.gunshoppeonline.com/tagua-iph-in-pant-1911-5.html
Tagua, Inside The Pant Holster, Fits Colt Government, 5" Barrel, Right Hand, Black Leather

(South West Florida) Discreet Holster by HBC Concealment Claw shield 9/40 Black None - $ 60

Sun, 07 Dec 2025 08:08:56 GMT

Discreet Holster by HBC Concealment Claw shield 9/40 Black None

https://www.gunshoppeonline.com/discreet-holster-by-hbc-concealment-claw.html

This holster is designed for concealed carry, whether you wear a suit and tie or t-shirt and blue jeans every day. It fits well anywhere on your waist, from appendix carry, to small of back.

The holster utilizes a strong, durable, belt clip with the ability to adjust the cant angle.

The clip is offset from the holster to allow you to tuck your shirt in between the firearm and the clip for complete concealability, even when wearing a dress shirt.

The Ulti-Clip option offers the same concealability as the standard clip, but the Ulti-Clip is designed to firmly grip onto pants without the need for a belt.

The Claw is designed to rotate the holster in such a way that it presses the grip of your firearm tighter to your body to minimize "printing".

The adjustment screw allows you to custom tailor the resistance of the draw to your liking.

Constructed out of tough, .080” kydex, this holster can handle anything that you can throw at it, from everyday carry, to rough days of training at the range.

(Florida) AR-15 Carbine Upper – 16″ 5.56 Heavy Barrel – 15″ M-lok Rail - $ 269

Sun, 07 Dec 2025 08:08:56 GMT

Complete built upper receiver:

Heavy 4150 chrome vanadium barrel, chambered in 5.56NATO with a 1:7 twist
Birdcage flash hider
Carbine length gas system
15″ m-lok handguard
Flat-top mil-spec upper receiver with installed dust cover and forward assist
No BCG or charging handle

Direct Link: https://3crtactical.com/product/ar-15-carbine-upper-16-5-56-heavy-barrel-15-m-lok-rail/

(Florida) Oakley Tacticle Goggles - $ 25

Sun, 07 Dec 2025 08:08:56 GMT

OAKLEY TACTICLE GOGGLES. NEW IN BOX. $25 Call BOB 239-292-3511

(Florida) Glock 19 RMR Cut Black DLC Slide - $ 170

Sun, 07 Dec 2025 08:08:52 GMT

Hard black DLC (diamond like carbon) finish
Trijicon RMR cut for optics or cover plate
Iron sight cuts
Front and rear serrations for ease of operation
Compatible with Gen 1-3 Glock Frames / Polymer80 PF940C

Note: It is strongly advised to lubricate the rails before installing as this will allow the slide to break in properly.

Direct Link: https://3crtactical.com/product/glock-19-rmr-cut-black-dlc-slide/

(Florida) Glock 43/43X Iron Sight Cut Black DLC Slide - $ 165

Sun, 07 Dec 2025 08:08:52 GMT

DLC (Diamond Like Carbon) coated Glock 43/43X slide comes with cuts for installing iron sights. Front and rear serrations make for ease of operation.

Will fit standard Glock 43 slide completion kits and barrels.

Fits OEM Glock 43 and Polymer80 SS80 frames.

Note: It is strongly advised to lubricate the rails before installing as this will allow the slide to break in properly.

Direct Link: https://3crtactical.com/product/glock-43-43x-iron-sight-cut-black-dlc-slide/

(Florida) Brownells 308AR Nitride Bolt Carrier Group - $ 165

Sun, 07 Dec 2025 08:08:52 GMT

The Brownells Complete .308 Bolt Carrier Group is designed to operate reliably in DPMS LR-308 pattern rifles chambered in .308, .243, 7mm-08, .338 Federal, .260 Remington, 6.5mm Creedmoor, or any other cartridge based on the .308 Winchester. These BCGs are manufactured to the same uncompromising standards as our M16-style BCGs. Our Complete .308 Bolt Carrier Group has a bolt machined from robust 9310 steel, heat-treated and shot-peened for superb hardness. The carrier itself is fabricated from hardened 8620 steel. Both are magnetic particle inspected (MPI) to make sure there are no hidden microscopic flaws that could lead to premature failure.

Carrier has forward assist notches Extractor is installed with rubber insert and spring Gas key screws are torqued and staked For use in DPMS LR-308 pattern upper receivers only; NOT compatible with Armalite rifles You can get the Brownells Complete .308 Bolt Carrier Group with a hard Black Nitride finish that is exceptionally resistant to surface wear. Comes complete with firing pin, firing pin retaining pin, cam pin, gas rings, gas key, extractor, and ejector installed.

Note: Unlike BCGs with a traditional Parkerized finish, the carrier on our Black Nitride bolt carrier group is not hard-chromed inside because Nitride is actually harder than industrial chrome plating.

Direct Link: https://3crtactical.com/product/brownells-308ar-nitride-bolt-carrier-group/

(Florida) 9mm Gold Nitride Glock 43/43X Replacement Barrel - $ 95

Sun, 07 Dec 2025 08:08:52 GMT

This barrel is a drop-in replacement for the factory Glock 43 barrel.

9mm caliber
4150 Gold Nitride (TiN) satin finish

Direct Link: https://3crtactical.com/product/9mm-gold-nitride-glock-43-replacement-barrel/

(Florida) 9mm Black Nitride Glock 43/43X Replacement Barrel - $ 90

Sun, 07 Dec 2025 08:08:52 GMT

This barrel is a drop-in replacement for the factory Glock 43 barrel.

9mm caliber
4150 Black Nitride finish

Direct Link: https://3crtactical.com/product/9mm-black-nitride-glock-43-replacement-barrel/

(Panama City) TRIJICON RM06 C - $ 530

Sun, 07 Dec 2025 08:08:52 GMT

NEW IN BOX

(Florida) AR15 Rifle Kit – Premium 16″ 5.56 Barrel 15″ MLOK Rail M4 Stock - $ 575

Sun, 07 Dec 2025 08:08:52 GMT

Everything you need to build out a high quality AR15 carbine using whatever lower receiver you want. Test-fired, and quality checked , these AR15 rifle kits will provide you a lifetime of reliable service. Built of only quality USA manufactured parts. Each unit is assembled with care and fully tested to ensure that your build will function the first time. Compatible with any mil-spec dimension AR15 lower receiver.

Upper Receiver
- 16″ 4150CMV Barrel – 1:7 twist – mid-length gas system – nitride finish
- 15″ free float MLOK hand guard full length top picatinny rail section
- Forged 7075-T6 upper receiver
- Nitride finish BCG with 9310 bolt
- A2 style flash hider
Lower Parts Kit
Buffer Tube Kit
- Mil-spec dimension buffer tube
- Carbine weight buffer
- Carbine buffer spring
- Standard end plate and castle nut
M4 Stock with QD mounts
Manufactured in the USA using all American made components

Direct Link: https://3crtactical.com/product/ar15-rifle-kit-premium-16-5-56-barrel-15-mlok-rail-m4-stock/

(South West Florida) MCK MICRO CONVERSION KIT | MCK Romeo 5 Combo ( Glock 17/19/19X/22/23/31/32/45) - $ 451

Sun, 07 Dec 2025 08:08:51 GMT

MCK MICRO CONVERSION KIT | MCK Romeo 5 Combo ( Glock 17/19/19X/22/23/31/32/45)
Fast Free Shipping + 100% satisfaction guarantee

Get more grip, improve your sight and stability with the official MCK Romeo 5 Upgrade Kit by MCS USA. This Upgrade Kit is designed for and fits the latest Micro Roni Kit the Micro Conversion Kit (MCK), as well as previous Micro Roni models for Glock 17 and 19.

With all products included in the Romeo 5 Upgrade Kit, you can now upgrade your MCK, Micro Roni 17 OR Micro Roni 19 into an Ultimate MCK, Micro Roni 17 OR Micro Roni 19.

Romeo5 Combo Includes :

MCK Micro conversion kit - all colors available
SIG ROMEO 5 Red dot sight
MCK Thumb stop set
MCK Flashlight
JE USA Flip up sights set

*Pistol and magazine not included*

(South West Florida) Pistol Brace Stabilizer -Glock - $ 90

Sun, 07 Dec 2025 08:08:51 GMT

MCS Glock Pistol Brace Stabilizer System

The GSS stabilizer system allows you to easily add a pistol brace to your Glock handgun. USA Made and ATF approved for pistol use. Works with with REGULAR FRAME (NO SF) GEN1-GEN3 Glock models: G17, G20, G21, G22, G24, G31, G34, G35, G37, G18 including the Long (L), Compensated (C), and Rough Textured Frame (RTF) versions of each

System Includes:

TSA Endo Adapter
MCS Castle nut
MCS QD end plate
MCS Pistol Tube
Breach blade 1.0 Brace

Increased stability when using your pistol

Quick and easy to attach (no weapon alterations necessary)

No interference with the usual operation

(Volusia County) Colt 1911 Rosewood Grips Commander Govt Wood Grip - $ 30

Sun, 07 Dec 2025 08:08:51 GMT

New Colt 1911 rosewood Double Diamond grips. These are the replacement grips that come standard on the XSE and 1991 series Commander and Government models. They have the cut out for ambi-dextrous safety. Shades vary from lighter red to darker brown. Many more items available at centralfloridapawn.com. Like us on Facebook @ centralfloridapawnandgun. Call us at 386-774-7296 or send us a message for further details. Please reference item # G-I-1330.

(Florida) RWB Glock 9mm Extended 33 Round Magazine - $ 19

Sun, 07 Dec 2025 08:08:51 GMT

Extended 33 round, steel lined polymer magazine for 9mm Glock pistols. Reinforced, black polymer body with steel feed lips. Witness holes to visually verify load.

Fits Glock 17, 19, 26.

Price shown is shipped cost. We do not take walk-in traffic.

Direct Link: https://3crtactical.com/product/rwb-glock-9mm-extended-33-round-magazine/

(Florida) TiN Locking Block for Glock 19, 23, 32, 38 Gen 3 - $ 20

Sun, 07 Dec 2025 08:08:51 GMT

17-4 Stainless Steel, 44C Rockwell Hardness (+/- 2) for durability
Stylish and corrosion resistant titanium nitride satin finish
Fits 3 pin Glock frames (2013+)
Fits Glock 19, 23, 32, 38 Gen 3

Direct Link: https://3crtactical.com/product/tin-locking-block-for-glock-19-23-32-38-gen-3/

(Volusia County) Colt Factory Magazines NEW all Calibers - $ 35

Sun, 07 Dec 2025 08:08:50 GMT

New factory Colt magazines in retail packaging and loose, .45, 9mm, and 10mm availble to fit multiple models. $35 and up depending on model. Many more firearms available at centralfloridapawn.com. Like us on Facebook @ centralfloridapawnandgun. Call us at 386-774-7296 or send us a message for further details.

(Volusia County) AK-47 75 Round Drum Magazine 75RDS 7.62x39 7.62 - $ 125

Sun, 07 Dec 2025 08:08:50 GMT

75 round drum 7.62x39 AK-47 drum, all metal, new in box, Korean made. Many more firearms and accessories available at centralfloridapawn.com. Like us on Facebook @ centralfloridapawnandgun. Call us at 386-774-7296 or send us a message for further details.

(Florida) Glock 17 Black Nitride RMR Cut Slide - $ 155

Sun, 07 Dec 2025 08:08:50 GMT

Hard black nitride finish
RMR cut for optics or cover plate
Iron sight cuts
Front and rear serrations for ease of operation
Compatible with Gen 1-3 Glock Frames / Polymer80 PF940V2

Direct Link: https://3crtactical.com/product/glock-17-black-nitride-rmr-cut-slide/